Skip to main content

Cinque Terre Collection

An old-time look and feel, with real-time quality. Cinque Terre is a floor your ancestors would be proud to stand on. This character grade floor features a multiple with design of 4”/5”/6” and is available in Maple and Hickory. With a 50 year residential warranty, the Cinque Terre collection sets the trend for the next generation of hardwood floors. 

In addition to being wire-brushed and hand-stained, the Cinque Terre collection features an "8" coat aluminum oxide satin finish by Valspar Industries. 

 Available in a 3/8" profile, the Cinque Terre collection offers lengths from to 15-60in. Cinque Terre is a versatile product that can be stapled, nailed, floated, or glued over almost any substrate. Truly, the Cinque Terre collection has it all. Its where performance meets design without leaving your budget behind. If you are in the market for a new hardwood floor, Check out our website below for a full line of products. 
www.bellacerafloors.com



CARB Compliant
Product complies with the U.S. Lacey Act and the California formaldehyde emissions standards (Cal Code 93120.2(a))
Scientific Certification System: TPC-9

Comments

Post a Comment

Popular posts from this blog

Solid Vs. Engineered Hardwood. Which is better?

In this article I will cover the difference between engineered and solid wood flooring. I often get asked; is engineered hardwood actually real wood? The answer to that question is: Yes! There are some who think that engineered wood is inferior to its solid counterpart. Solid wood has its benefits, however it is not necessarily better than engineered. Actually, the opposite just may be true. Engineered hardwood has a cross-plywood construction, with a solid wood veneer laminated to the top. Solid hardwood is just that, solid. Both styles range in thickness from 5/16 to 3/4 inch. Both types of floors come prefinished or unfinished and come in a variety of widths and styles. There are several benefits to engineered hardwood. Here are just a few. Engineered hardwood is more dimensionally stable than solid wood flooring. Engineered floors can be glued down directly to concrete, floated or stapled. They can be installed above, on, or below grade. Engineered floors are less prone to cupping...
34 comments
Read more

Top ten flooring questions to ask a retailer

1.) How does this floor compare to others? Why is it better?  2.) How long does it take to install?  3.) Can I get references on your company and your installer?  4.) How long can I expect this floor to last? What is its warranty?  5.) What separates you from your competition?  6.) Who is responsible for mistakes made?  7.) How long is your labor warranty? Make sure to read my article titled "Labor Warranties" on this blog. 8.) Will this floor fit my needs? Is it suitable for my home?  9.) How long have you been in business, what is your experience?  10.) What is the price for the services you are suggesting. If you focus on price first, you could possibly leave out some very important details. Remember, ask questions and lots of them.  Thanks again, The Floor Man.
5 comments
Read more

Urethane vs. Acrylic adhesives

If you are about to install engineered hardwood using the glue down method, I recommend that you read this article. One of the most important factors when installing engineered hardwood is the adhesive. Using the proper adhesive is critical to a successful installation. In this article I will briefly cover the differences between Acrylic and Urethane based adhesives. Let me start with acrylic adhesives. Acrylic adhesives are resin based and contain a certain percentage of water in them. The main problem with resin based adhesives, is the lack of tensile strength. In order for Acrylic adhesives to perform at their optimal level, the sub-floor needs to be well prepared and extremely flat. If the sub-floor is not level and flat and you choose to use an acrylic adhesive, I guarantee you will have hollow spots once the job is complete. Hollow spots are areas in which the wood floor is not adhered properly to the substrate. This problem is common and can be recognized by a popping or hollow ...
3 comments
Read more