Skip to main content

Luxury Vinyl Flooring



If you are looking for a floor that is both kid and pet friendly you may consider choosing solid vinyl plank or vinyl tile. This type of floor is pretty indestructible and is a great choice for an active home. Vinyl tile or plank is not only kid and pet friendly, it is also not affected by water. Vacuuming and using a damp mop can easily maintain solid vinyl flooring. Here are a couple of reasons you may consider this type of product. Solid vinyl floors are very durable and hold up well under most conditions; Solid vinyl is hypoallergenic, requires low maintenance, warm underfoot, and affordable.

These types of floors come in a variety of styles and patterns, the wood grain and tile pattern are the most popular. What ever design idea you may have, vinyl plank flooring can add the extra touch of class to your home. There are many different suppliers of solid vinyl. Armstrong, Nafco, Flexco and Konecto are some of the more common manufacturers in the marketplace. You should expect to pay a little more for luxury vinyl flooring compared to laminate, but less than most hardwoods.

No matter what type of flooring you decide to put in your home, do some research first? Take the time to learn about the product and don't rush into any decisions. Remember, having a good installer in your home ensures your money will be well spent.
A bad installer can cost everyone in the process. If you have any further questions please don't hesitate to ask.
Thanks,
The Floor Man

Comments

  1. What is your opinion of using vinyl planks on stairs?

    ReplyDelete
  2. Depends upon what type of vinyl you are using.
    I really don't recommend it. Luxury vinyl is a great product, but depending on the product, some scuff more than others. Are you putting vinyl plank in other areas in the home?
    Thanks for the question
    John

    ReplyDelete
  3. John,

    Sorry I didn't answer sooner- I was on vacation an purposely did not go near a computer!

    I have vinyl plank (Tarkett- installed in 2002) in my kitchen, dining room, and bathrooms already. I've been really happy with it- it has worn well, easy to clean, and most people think it's wood.

    The stairs and hallway that I need to re-floor connect to the dining room, and are the main corridor through the house...

    I had carpet there, but it didn't wear very well and was impossible to clean well.

    Any suggestions about the best flooring option?

    Price is an object, but I am willing to pay more to have the right product installed.

    Thanks,
    Dan

    ReplyDelete
  4. I recommend buying wooden stair treads. This is really the only type of product that will hold up long term. It is better to spend the money now, than to replace something later. Find your self a local sand and finish contractor and get a quote. you will most likely get your best price there. Don't go through retail on these.
    John

    ReplyDelete
  5. Vinyl flooring is a popular choice among home renovators who prioritize durability. We actually used vinyl flooring (Tampa) for our kitchen when we renovated it last year. Even after a year of use, there are no apparent streaks or damages. It still looks the same as the first day when we installed it. I suggest home owners to check online or visit local suppliers to get more information about vinyl flooring.

    ReplyDelete
  6. great tips Thank you for this information. It is really informative and helpful for the people Bathroom Remodeling Tampay Bay

    ReplyDelete
  7. Nice share! Thanks a lot for such a lovely blog posting this time around as well. Marble Tiles Tampay Bay

    ReplyDelete

Post a Comment

Popular posts from this blog

Urethane vs. Acrylic adhesives

If you are about to install engineered hardwood using the glue down method, I recommend that you read this article. One of the most important factors when installing engineered hardwood is the adhesive. Using the proper adhesive is critical to a successful installation. In this article I will briefly cover the differences between Acrylic and Urethane based adhesives. Let me start with acrylic adhesives. Acrylic adhesives are resin based and contain a certain percentage of water in them. The main problem with resin based adhesives, is the lack of tensile strength. In order for Acrylic adhesives to perform at their optimal level, the sub-floor needs to be well prepared and extremely flat. If the sub-floor is not level and flat and you choose to use an acrylic adhesive, I guarantee you will have hollow spots once the job is complete. Hollow spots are areas in which the wood floor is not adhered properly to the substrate. This problem is common and can be recognized by a popping or hollow

Solid Vs. Engineered Hardwood. Which is better?

In this article I will cover the difference between engineered and solid wood flooring. I often get asked; is engineered hardwood actually real wood? The answer to that question is: Yes! There are some who think that engineered wood is inferior to its solid counterpart. Solid wood has its benefits, however it is not necessarily better than engineered. Actually, the opposite just may be true. Engineered hardwood has a cross-plywood construction, with a solid wood veneer laminated to the top. Solid hardwood is just that, solid. Both styles range in thickness from 5/16 to 3/4 inch. Both types of floors come prefinished or unfinished and come in a variety of widths and styles. There are several benefits to engineered hardwood. Here are just a few. Engineered hardwood is more dimensionally stable than solid wood flooring. Engineered floors can be glued down directly to concrete, floated or stapled. They can be installed above, on, or below grade. Engineered floors are less prone to cupping

The Valinge Locking System

If you are looking to purchase a new laminate or hardwood floor and you plan on doing it yourself, then I recommend buying Robina. Robina laminate and hardwood, both feature the Valinge locking system. This locking system is the best on the market today and is the easiest laminate/wood floor to install ever. Valinge produces a 2G and a 5G locking mechanism. The 5G versions are used on all 12mm laminates and all 1/2" wood products. The 2G systems are used on 8.3mm laminates and 3/8" wood products. The main difference between the 2G and the 5G is that the 5G products has a plastic clip on the end of the boards, the 2G does not. However, both locking systems work identically. The big advantage Valinge has against its competition is that there is no need for a tapping block or hammer. This product drops and locks right into place with no beating or banging. The Unilin system requires a tapping block and hammer (which could damage the floor) and is more difficult to install. The V